Skip to content

Luminaire settings🔗

The setting possibilities depend on the type of luminaire:

  • The Standard lamp can only be turned on and off.
  • The dimmable luminaire can be dimmed.
  • For RGB, RGBW and TW luminaires, color and color temperature can be adjusted.

Turn the luminaire on/off🔗

  1. Navigate to the location with the luminaire.
  2. Turn on the advanced lighting operation.
  3. Click on the luminaire that you want to turn on or off.

luminaire_on

Change brightness🔗

Press on the luminaire and hold for 2 seconds: the brightness scale appears. Raise or lower the value to the desired level.

change_light_luminaire

Additional setting.🔗

You can set the maximum and minimum brightness levels available, the color temperature (for RGB, RGBW and TW luminaires), and the time the luminaire will be on and off.

Press and hold on the luminaire for 3 seconds. Additional settings window will open.

luminaire_deep

  • Max level, % and Min level, % - maximum and minimum possible brightness values.
  • Fade time, s - during what time after pressing the button the luminaire is turned on or off.
  • Brightness, color temperature and RGB scales.
  • Apply the last saved settings. If you have adjusted one luminaire and want to adjust the other luminaire in the same way, press this button.

Luminaire Status🔗

  • The switched off luminaire is shown only as an outline on the 3D model.
  • The luminaire turned on at full brightness has an outline and a fill of maximum brightness.
  • Dimmable luminaire with intermediate brightness has a paler fill, which is proportional to the current luminaire brightness.
  • Faulty luminaire is shown with a flashing black outline.