Skip to content

Lighting Scene🔗

The lighting scene allows you to save settings for different lights and play them back later.

By default, two scenes are available for the location - fully on and fully off lighting. Two more scenes you can create yourself and apply them later.

Scenes can be created for different levels of locations: for the whole object, for several floors, for a specific floor, for a cabinet, etc.

Create a scene🔗

  1. Open the advanced mode for working with light.
  2. Switch to the location, for which you are going to create a scene.
  3. Set up the luminaires as needed. How to configure individual luminaires
  4. Press and hold down the custom scene button (I or II), and then confirm the save.

save_scene

Warning

Make sure you are in the correct location before saving. The lights are set up in the final location, so move to the right level if necessary. For example, if you were setting up the scene for an entire floor - go back to the level with the entire floor.

Switch to scene.🔗

  1. Open the advanced lighting mode.
  2. Go to the location where you want to turn on the scene.
  3. Click the button with the scene.