Skip to content

Configure Schedule🔗

You can set up the lighting to work according to a schedule.

The schedule is set up through the AWADA app by hours and minutes for each day of the week.

How to configure🔗

Let's look at an example where a production room needs to be configured in three modes:

  1. Duty mode (from 00:00 to 07:00) - most of the lights in the workshop are off, and the rest work at the specified power. For this purpose previously created and saved lighting scene.
  2. Working mode (from 07:00 to 00:00)-the light is regulated by light and presence sensors.
  3. Weekend - all lights are turned off.

To get to the schedule setting, click schedule in the lower left corner of the application.

Duty and Work modes🔗

  1. Select the desired location or the entire facility to configure.
  2. Toggle the toggle switch Scheduler enabled.
  3. Press +. schedule_weekday_1
  4. Specify the time and press√. It is most convenient to fill in the schedule sequentially starting at 00:00:00.
  5. Select what you plan to set up:
    • Entire location - you can select the light scene for the room. In the example, it is suitable for standby mode.
    • Light areas - you can specify one of five profiles for the light zone. Suitable for working mode.
    • Individual luminaires, TW/RGB(W)-luminaires - specify settings for individual luminaires. Can work independently of light scenes and light zones.
  6. Press + and select an action. For standby mode, this is the light scene that was previously saved. This is how you set up the standby mode. schedule_weekday_2
  7. Press + opposite the Add the time-point field.
  8. Specify the time as 07:00:00 and press √.
  9. Since automation must work in working mode, turn on all light zones of the room or specify the desired profiles for the zones:
    • if the first profile fits, just indicate Switch on;
    • if you need another profile, first select the profile for that zone, then select the zone again and press Switch on. schedule_weekday_3

After that, two modes will work on weekdays.

Weekends🔗

  1. On the production calendar, specify the days that will be off.
  2. Click on the Holiday tab.
  3. Press +.
  4. Specify a time of 00:00:00 and press √.
  5. Select Entire location.
  6. Press + and select the Switch off action.

schedule_weekend

There will be no lights on the site on weekends.

Algorithm lighting.🔗

IntroPage10.png

RGB(W)- and TW lights can be adjusted so that they have varying color temperatures throughout the day. This can have a positive effect on well-being and productivity in production rooms and offices with a lack of daylight during daylight hours and in autumn and winter.

You can set the color temperature change via a timetable: when selecting, choose Lighting TW. The more time intervals and the smaller the temperature difference between them, the smoother the color temperature change of the luminaires will be.