Control modes🔗

For each system connected to the AWADA platform, the application has a special sidebar. With the side panels you can change the control mode.

If the platform controls only lighting, there will be one panel. If AWADA controls lighting, video surveillance and climate, there will be three side panels.

Standard mode	Controls off	Extended mode

Standard mode🔗

Enabled by default.

The lighting system is available in standard mode:

• Enabling and disabling automation on the entire project, in a light zone, or in a specific location.
• Switching lights on and off in the whole project or in a specific location.
• Switching to light zone control.

Controls off🔗

If the sidebar is minimized, you cannot control the system: you can only work with other systems, and if there are none, you can only move around the project.

To turn off control, click and move the sidebar from the standard mode to the left.

To return to the standard mode, press > to the right of the panel.

Extended mode🔗

In advanced mode, only the selected system can be controlled.

To enter advanced mode, press > to the right of the panel.

For the lighting system in advanced mode is available:

• Switching on and off:
  • lighting on the whole project;
  • lighting in a particular location;
  • individual lights.
• Monitoring of energy consumption.
• Switching light scenes.
• Setting up light scenes.
• Turning on and off the light and presence sensors.

To return to standard mode, press < on the right side of the panel.