Alarm system🔗
The AWADA platform supports the operation of sensors:
security alarms;
fire alarms;
leakage.
With the app, you can see where sensors are installed and be notified when an alarm goes off.
Alarm status🔗
| Ok | Alarm sensor is off | Sensor defective | The alarm went off |
|---|---|---|---|
 |
 |
 |
 |
| If everything works correctly, the object with an alarm sensor is surrounded by an orange outline. Fire and leakage sensors are not displayed in any way. | If the guard sensor is manually disabled, then in the advanced mode there will be a contour of a person inside the object, and in the standard mode nothing will be displayed (including no contour). | If a sensor is faulty, the object will be outlined with a black, unblinking outline. Inside the outline will indicate the type of faulty sensor, and if more than one sensor is faulty, they will blink alternately. | The room in which the sensor has been triggered is surrounded by an orange outline and flashes. The color inside the outline depends on which sensor is triggered. For example, if it is a leak sensor, it will blink blue. |
If the alarm is triggered, you will hear a notification sound and a tooltip on the screen will tell you where and which sensor is triggered. To go directly to the desired location in the app, tap on the tooltip.
How to disable the alarm🔗
If a sensor is triggered, you cannot disable the alarm via the app: you have to make sure that the room is safe and turn it off manually.
If the alarm is in the standard state, you can disable the alarm sensors. To do this, go to advanced mode and press 
.
Leak and fire alarm sensors cannot be disabled in the app.
