Skip to content

Ventilation control🔗

In the app you can:

  • turn all ventilation on and off;
  • turn on or turn off only the air supply or only the exhaust;
  • control the supply and exhaust fans;
  • Set the target temperature of the supply air and the operating mode;
  • check the condition of the air handling unit and its components.

Note

Ventilation affects the temperature in the room. The temperature limits are specified in the laws of your country. When adjusting the ventilation, check the room temperature so that the values are within the permitted limits. Ventilation also affects the ratio of oxygen to carbon dioxide in the room, so set it carefully.

To open the ventilation setting, click on the ventilation unit in your project.

On or off🔗

All ventilation🔗

To turn ventilation on or off, toggle the toggle switch opposite this field Unit is on.

Inflow🔗

Press and hold the air inlet flap for 2 seconds and then toggle the toggle switch.

Outflow🔗

Press and hold the exhaust damper for 2 seconds and then toggle the toggle switch.

vent

Set the target supply air temperature🔗

You can adjust the target temperature so that the supply air temperature is different from the outdoor temperature. For example, if it is -20°C outside, you can set a target temperature of 18°C and the air heater will raise the temperature.

Click on the indicator in the Target temperature field and set the desired value.

Select fan speed🔗

To change the speed, select the desired option in the Fan speed field: the speed of the exhaust and supply fans will change.

To turn off one of the fans, press and hold it for 2 seconds and then toggle the toggle switch.

State of the equipment🔗

The clouds show information about the status of the equipment and operation status, as well as the outdoor and inflow temperatures.

If you do not have clouds enabled, click on State in the lower right corner.

You can also check the status dynamics. To do this, click in the lower left corner Charts.

vent